Back Set Concrete Remover – Master Info 2021

The back set concrete remover is a tool that can be used to remove concrete without the use of heavy machinery. These tools are also known as power chisels, and they work by drilling holes in the surface of the concrete which causes it to break away from its foundation.

They are often used for repairing sidewalks or steps, but they can also be rented out for home repairs such as removing old driveways or pool decks.

What is back set concrete remover?

What is back set concrete remover?
What is back set concrete remover?

It’s a fast acting, strong, single action gel formula. Gel is more dense than liquid formulas for this reason it works faster and keeps the acid longer in contact with concrete. The product remains where applied making it easier to remove you don’t have to worry about it dripping down your wall or ruining your carpet just let it sit for 45 minutes then rinse clean with water.

For best results use at night when activity slows down which allows acid time to eat away rust or preventing new surface from forming this way you save yourself money on labor costs because there is no need to come back later on to do another pass with an acid solution which also saves time allowing you to finish job within one day instead of two days so by knowing how simple back set removal is you save time and money thus getting the job done right the first time.

This works on all types of concrete including but not limited to: garage floor, driveway, sidewalk, patio, pool deck, stamped concrete, flagstone & many other surfaces. Back set leaves no residue or chemical odor it dries clear which allows you to apply new surface over it with out seeing any trace of acid solution.. Back set is preferred by contractors for this reason because it’s easy to use & get’s the job done fast!

What is back set concrete remover?
What is back set concrete remover?

All you need is a spray bottle 1 gallon works best an acid resistant pump up garden hose or pressure washer if available . Simply mix between one half cup to three quarter cup per gallon of water after completely mixing pour onto surface let sit for 45 minutes then rinse clean with water. Let the deck air dry for a couple hours than apply new surface or paint and your done!

Back set makes it possible to remove most all types of concrete stains including: rust, grease, oil, mold & mildew stains, most coffee and tea stains and many others.

Why should I use back set concrete remover?

Backset concrete remover is often used as a substitute for harsh acids and high-pressure steam cleaners. In general, they are easier to use and do not require help from professionals. You can even hire a contractor if you want to avoid the work completely. They allow you to rewash your driveway or sidewalk in less than 2 hours.

What makes back set concrete cleaner better than any other product?

What makes back set concrete cleaner better than any other product?
What makes back set concrete cleaner better than any other product?

Everyone who has ever used traditional methods of cleaning their driveway knows how long it takes. Usually it’s about two days of constant scrubbing with acid solution (minimum) or high pressure water jet (maximum). Unfortunately, this kind of service is expensive and requires special equipment only available through professional contractors. Back set concrete cleaner will allow you to perform the work by yourself and in much less time.

What is the secret?

Back set concrete remover uses strong alkaline solution stored in a cement-resistant bottle inside a gun. It sprays it on any surface using a thick 30/30 nozzle adapter. Depending on the type of surface, amount of dirt or hardness of concrete, backset cleaner can be used several times before being emptied from its original container.

This allows you to save up to 80% when compared with traditional acid cleaners! All chemicals are known for their eco-friendliness so there’s no need to worry about health issues.

How do I use it?

How do I use it?
How do I use it?

Using a backset cleaner is very easy. All you need to do is follow these simple steps:

Check the weather – make sure it’s not too windy or rainy outside and that the surface you’re going to clean is dry. Shake the bottle well – mix the chemicals thoroughly. Point the gun at the surface and squeeze the trigger while moving back and forth. Let the surface dry completely – usually it takes about 2 hours. If needed, repeat steps 2-5.

What are some of the benefits of using back set concrete cleaner?

What are some of the benefits of using back set concrete cleaner?
What are some of the benefits of using back set concrete cleaner?

Since back set remover contains no acids it is completely safe to use. It ensures protection of your health and safety as well as that of your family (pets included). Another benefit is the fact that you can remove stains without any damage to the surface .

It’s perfect for those who want to re-surface old, faded or damaged areas. Since there are no harmful chemicals involved, using a gun is much faster than traditional cleaning methods and saves up to 70% of time!

How often should I use backset cleaner on my driveway?

How often should I use backset cleaner on my driveway?
How often should I use backset cleaner on my driveway?

Since the product is eco-friendly, you can repeat this process whenever needed without damaging your garage floor or porch. Just make sure to do it before any oil stains appear on the surface. Since the manufacturer claims that one bottle (2,5 liters) can be used up to 100 times it will take quite some time until you need a new bottle of cleaner.

All chemicals are known for their long-term stability so once opened, bottles should be stored in clean and sealed containers until its next use. It’s also advised to store it away from children since these chemicals may cause irritation upon contact with eyes and skin! In case of contact with either rinse with plenty of water and seek immediate medical attention.

FAQs about back set concrete remover

FAQs about back set concrete remover
FAQs about back set concrete remover

Can I use backset cleaner on my driveway?

Absolutely yes! Backset cleaner was made to remove stubborn dirt, grease and stains from concrete and asphalt surfaces. It is perfect for driveways, sidewalks, patios, pool decks and garage floors.

Is backset cleaner good for removing oil spills on my driveway?

Yes, it’s great for removing oil stains from asphalt surfaces. Simply follow steps 2-5 and make sure not let the chemical dry out until it’s completely absorbed.

Repeat the process as many times as needed and let it dry for several hours in between applications. If the stain is deep-rooted you should consider sealing it with a special sealer or buying an additional cartridge.

Can I use backset cleaner on limestone?

Yes, you can! In fact, it’s one of the best chemicals for this purpose since there are no acids involved. Simply follow steps 2-5 from “How do I use it?” section and make sure to use enough chemicals during your first application so that nothing remains after repeated scrubbing movements.

Let it sit until all dirt has been dissolved then rinse thoroughly with warm water before drying. Seal your newly cleaned surface to ensure protection against oil stains.

Final thoughts

Back set concrete remover is the best way to remove unwanted cement from your driveway. If you’re looking for a solution that will work quickly and easily, this may be it. Just make sure you know how to use it first!

Leave a Comment