Walker glides for concrete – If you’re looking to improve your concrete walkways and patios, you may want to consider using Walker Glides. These devices create a smooth, even surface that makes walking on concrete much more comfortable. They are easy to install and can be used on any type of concrete.
What are Walker Glides?
Walker Glides are detachable walker legs that replace the standard front legs of a walker. They come in a set of 2 and attach to most standard aluminum or plastic walkers with bolts & screws provided. Walker Glides help the user to maintain their natural walking motion, improving safety and independence while reducing fatigue. This article will explain how they work, what conditions they benefit, who might be a good candidate for using them, and provide some tips for use.
How do Walker Glides work?
There are several components that make up an effective gait rehabilitation system . First off is biomechanics – this is basically your body’s natural movement patterns when you’re walking. When comes to proper gait form, the movement of each joint must be properly coordinated to create a smooth and fluid walking pattern. The direction your toes point is important for this coordination, since they help us balance while moving, especially during various phases of our stride . It has been observed that people who use walkers tend to point their toes inwards when using them.
The inward toe pointing displaces the center of mass towards the inside of the feet , which then makes it harder for your body to keep balance during forward motion. Worsening balance issues leads to more use of arm swing for stabilization purposes, which can cause fatigue very quickly. Walker Glides force users to maintain good gait form by requiring outward toe pointing – so essentially they are cuing you into doing what’s best for your body!
In addition, Walker Glides also provide resistance during the stance phase of walking – which helps to increase muscle activity and improve strength. In order to walk normally, we need to generate enough force against the ground to push ourselves forward. This force comes from our leg muscles, especially the calf muscles (known as the gastrocnemius muscle).
When these muscles are weak or fatigued, it’s harder for us to push ourselves forward, leading to a hesitation in our stride and often times a limp . The added resistance from Walker Glides helps to build up these muscles, so that you can walk more efficiently and with less fatigue.
Who might be a good candidate for using Walker Glides?
People who would benefit from using Walker Glides include those who have poor balance, weak muscles, and/or experience fatigue when walking. They can be used by anyone who is able to stand independently, including those with Multiple Sclerosis (MS), Parkinson’s Disease (PD), Arthritis, Hip or Knee Replacements, Strokes, and many other conditions. Walker Glides are also helpful for those who are post-operative or recuperating from an injury.
Tips for using Walker Glides
1. Start with the glides in a “neutral” position – that is, with both feet parallel and pointing straight ahead. You may need to adjust the angle of the glides depending on how your walker is set up.
2. Initiate your steps by pushing off from the ground with your heel, not your toes.
3. Use your arm swing for balance, but try to minimize its use as much as possible.
4. Be sure to keep your toes pointed straight ahead – don’t let them turn inwards!
5. Take small steps when starting out, and gradually increase your stride length as you get more comfortable using the glides.
Walker Glides can be a great way to improve safety and independence while walking, and can help to reduce fatigue. They are easy to attach and use, and come in a variety of sizes to fit most standard walkers. If you are having trouble maintaining gait form, or are experiencing fatigue while using your walker, give Walker Glides a try.
How to install a set of Walkers Glides?
Installing a set of Walker Glides is a simple process. The following steps will guide you through the installation:
1. Remove the old glides from your walker.
2. Clean the surface of your walker where the new glides will be installed.
3. Peel the adhesive backing off of the Walker Glides and press them into place on the cleaned surface of your walker.
4. Allow the Walker Glides to adhere to the walker for 24 hours before using them.
Walkers are an important tool for those who are recovering from an injury or surgery, or who are suffering from a medical condition that affects their mobility. Walker Glides are an accessory that can make using a walker easier and more comfortable.
Walker Glides attach to the bottom of your walker and help to reduce the amount of friction between the walker and the surface on which it is being used. This can make walking with a walker easier, especially on surfaces such as linoleum or hardwood floors.
There are a few different types of Walker Glides available, so it is important to choose the right type for your walker. The most common type of Walker Glide is the adhesive glide. These glides attach to the bottom of your walker with an adhesive strip and provide a smooth surface for your walker to glide across.
Another type of Walker Glide is the T-shaped glide. This type of glide attaches to the bottom of your walker with screws and provides a wide base that helps to stabilize your walker.
FAQs about walker glides for concrete.
How do I use walker glides for concrete?
Walker glides for concrete come in various sizes and it is important that you select the correct glides for your walker. Select a size that is closest to, or just slightly smaller than, the base of your walker. Press firmly on the glides until they fully attach and stay in place.
How much do walker glides for concrete cost?
Walkers glide prices vary depending on where you purchase them from and what type you buy. You can typically find them for between $1-$5 per set online or at local pharmacies such as Walgreens, CVS, etc…
Where can I buy walker glides for concrete?
Walker glides are available online through websites like Amazon or through various specialty retailers including medical supply stores. You can also find them at local pharmacies such as Walgreens, CVS, etc.
How long do walker glides for concrete last?
Walker glides typically last for 6-12 months, but this will depend on how often they are used and the type of surface they are used on. It is recommended that you replace your walker glides when they start to show signs of wear and tear.
This is an important safety issue for people who walk on concrete. If you are the person that has to do all of this work, it can be tiring and time consuming to make sure your floor is safe for everyone. That’s where Walker Glides come in handy!